Cabinet Table Saw

of January 2022

*Disclaimer: BestAlternativesReview earns a commission from qualifying purchases.

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

1 – DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

Check the price on Amazon

Buy on Amazon

Features:

  • Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
  • Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM
  • Rolling stand designed for easy set up and breakdown with excellent stability
  • Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
  • Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

2 – DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch (DWE7485)

Check the price on Amazon

Buy on Amazon

Features:

  • Portability: Compact size for ease of transportation and storage
  • Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
  • Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets
  • Power: 15 Amp, 5800 rpm motor
  • Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use

SKIL 15 Amp 10 Inch Table Saw with Stand- TS6307-00

3 – SKIL 15 Amp 10 Inch Table Saw with Stand- TS6307-00

Check the price on Amazon

Buy on Amazon

Features:

  • RACK AND PINION FENCE RAILS - Ensures fence stays parallel to blade for fast smooth, and accurate cuts
  • INTEGRATED FOLDING STAND - Legs quickly fold in to provide portability and convenient storage
  • PARALLEL BLADE ALIGNMENT - Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
  • 4x4 CUTTING CAPACITY - Cuts material up to 4x4 at 90 degrees
  • 2-47° BEVEL CAPACITY - Cuts between 2 positive stops at 0 and 45 degrees with quick release lever

DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet

4 – DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet

Check the price on Amazon

Buy on Amazon

Features:

  • EFFORTLESSLY CUT THIN RIPS: The DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood / Ripping Chair Slates, Cabinet allows you to cut reproducible thin rip cuts on the alternate side of a saw blade for safety, accuracy, and cut repeatability; This jig maximizes worker safety, streamlines your workflow, and produces successful outcomes
  • EVEN CUTS: Measurement markings on jig are easy to read so you can make accurate cuts; Ball-bearing roller keeps stock even while fed through the blade creating a smooth flow and applying consistent pressure
  • SAFETY FIRST: Protects your hands and fingers by preventing unnecessary hand proximity to the sharp blade; Reduces dangerous kickback by keeping the stock completely on the track and preventing it from getting trapped between the fence and the blade; Allows you to work on the free side of the blade thus avoiding unnecessary risk and stock binding
  • SECURE GRIP: Easy-to-grip knob on the top turns the locking miter bar piece and holds its position firmly to secure guide position; Dual-locking feature ensures the guide point locks jig in an optimal placement in a standard 3/4-inch x 3/8-inch miter slot for a specific job; Roller on the end acts as a stop for the material and allows the wood to flow past the jig without resistance
  • VARIOUS APPLICATIONS: Rip thin slates for chair backs, frames for cabinets, use with band saws and routers, or even use as a crosscut stop for making multiple cutoffs on the right side of a saw blade; Setup and use instructions are included for your convenience

Bora Portamate PM-3750 Mobile Base & T Extension Combo For Cabinet Table Saws Withup To 50' Extension Tables

5 – Bora Portamate PM-3750 Mobile Base & T Extension Combo For Cabinet Table Saws Withup To 50" Extension Tables

Check the price on Amazon

Buy on Amazon

Features:

  • Three foot operated floor locks
  • Adjustable in 1" increments
  • Now you can have a mobile base that will move both your table saw and the leg supports together
  • 1500 pound weight capacity

DELTA 50-278 Mobile Machine Base (For 10-Inch Cabinet Saws)

6 – DELTA 50-278 Mobile Machine Base (For 10-Inch Cabinet Saws)

Check the price on Amazon

Buy on Amazon

Features:

  • Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning
  • Use with: hybrid saws; 36-750 cabinet saw
  • Durable, heavy-gauge steel
  • Compatible with Delta hybrid saws and the Delta 36-750 cabinet saw
  • Measures 18-1/2 inches x 21-1/2 inches

Grizzly Industrial G0771Z - 10' 2 HP 120V Hybrid Table Saw with T-Shaped Fence

7 – Grizzly Industrial G0771Z - 10" 2 HP 120V Hybrid Table Saw with T-Shaped Fence

Check the price on Amazon

Buy on Amazon

Features:

  • Precision-ground cast iron table and extension wings
  • Cast iron trunnions
  • Easy-glide fence system
  • Quick-release blade guard & riving knife
  • 4" Dust port

Grizzly Industrial G1023RLWX - 10' 5 HP 240V Cabinet Table Saw with Built-in Router Table

8 – Grizzly Industrial G1023RLWX - 10" 5 HP 240V Cabinet Table Saw with Built-in Router Table

Check the price on Amazon

Buy on Amazon

Features:

  • All sealed ball bearing construction Serpentine drive belt Powder coated paint Quick change between riving knife & splitter guard Base dimension: 20-1/2" x 20-1/2" Approx shipping weight: 623 lbs.

Grizzly Industrial G0651-10' 3 HP 220V Heavy Duty Cabinet Table Saw with Riving Knife

9 – Grizzly Industrial G0651-10" 3 HP 220V Heavy Duty Cabinet Table Saw with Riving Knife

Check the price on Amazon

Buy on Amazon

Features:

  • Motor: 3 HP, 220V, single-phase
  • Amps: 13
  • Blade tilt: Left, 45°
  • Table height from floor: 34-7/8"
  • Table size with extension: 27" x 75-3/4"

Grizzly G1023RLX Cabinet Left-Tilting Table Saw, 10-Inch

10 – Grizzly G1023RLX Cabinet Left-Tilting Table Saw, 10-Inch

Check the price on Amazon

Buy on Amazon

Features:

  • Motor: 3 HP, 240V, single-phase, 14A, 3450 RPM
  • Solid cast iron table is first heat treated for strength then milled perfectly flat and ground to a mirror-like finish
  • Extension table: 44" x 27"
  • Table has T-slots so your miter gauge will not fall off the table when retracted
  • 5/8" diameter arbor is long enough to accept dado blades up to 13/16"

 

Four Questions to Ask Before You Buy a Cabinet Table Saw

 
A Cabinet table saw is the most common saw in most woodworking shops. Common uses: Woodworking, cabinet making of all sizes, large construction projects, precision cuts required by a few professionals-commercial grade woodworking lathes. Cabinet Table Saw Professionals. Most powerful professional grade woodworking machine. Produces accurate, clean lines.
 
Not just any table saw will do for most woodworkers. If you are planning on doing your own work, you’ll want to get a cabinet table saw that is built to stand up to heavy duty use. Cabinet saws come in many different makes, models and types. Power tool units have their place, but if you’re going to be handling the saw yourself you want to invest in a true instrument made of heavy gauge steel with a heavy duty motor.
 
There are several major differences between commercial grade and home/home units, but there are some similarities as well. Both use the same blade (or teeth) and operate the same way: they cut through wood using a spinning motion. However, there are a few key differences to consider when choosing between cabinet table saws. For example, there are hybrid table saws that combine the features of both types of units: the cabinet saw blade and the table unit. The hybrid unit has an internal ripping blade for depth and ripping power, and a table plate that attaches to the unit for support and accuracy.
 
While cabinet saws primarily use a straight-edge blade to cut wood, some variants use a rip blade. Rip blades are not only more expensive, but they also cause less collateral damage to surrounding objects. Power tool kickback is another drawback to consider. Kickback is an opposite, or side effect, to what we’re talking about when we say that a blade is ineffective at cutting certain things accurately.
 
First, let’s look at the question of whether or not cabinet saws are appropriate for certain projects. The answer lies in how safe the machine is for the materials it’s cutting. In general, saws designed for woodworking are considered safer than those designed for other work, because their blades are typically longer and stronger. If you have concerns about your project, make sure the equipment you choose is built for safety.
 
Second, let’s take a look at whether or not tabletop saws (i.e., bench top models) are right for woodworking projects. In general, these are intended for people who are interested in building small woodworking projects from scratch (i.e., bench top projects). Table saws are best used for large-scale, industrial-grade woodworking projects. Also, keep in mind that while diy machines are less dangerous than most powered machinery, they’re not as safe. Portable power tools should be kept as far away from any human contact as possible. While you won’t run the risk of bodily harm when using your table saw, you will likely encounter kickback if you’re not wearing protection.
 
Third, let’s take a look at whether or not you need blade guards. A good set of blade guards can extend the life of your saw blade, as well as improve the safety of the operator. These guard styles can be purchased for your cabinet saw on the same order that you purchase the blade. Some blade guards are made of solid steel, while others are made of rubber or plastic. This type of guard usually slides along a metal bar to protect the blade at the side of the saw, but sometimes it’s possible to buy a combination of guards, protecting both the blade arbor.
 
Fourth, how do kickback prevention and blade alignment factors affect my purchase? Kickbacks are most often caused by improper saw cutting angles and/or using an automatic braking system with a chain-drive mechanism. (Always use a manual braking system with power tools.) Automatic braking systems with chainsaw blades that rotate automatically are especially dangerous, since they can kickback without the operator’s knowledge or control. Blades with flat, curved edges are also very dangerous, as they may slice into a person and severely injure them.