Concrete Resurfacer

of October 2021

*Disclaimer: BestAlternativesReview earns a commission from qualifying purchases.

SAKRETE | Flo-Coat Concrete Resurfacer | 20 lb

1 – SAKRETE | Flo-Coat Concrete Resurfacer | 20 lb

Check the price on Amazon

Buy on Amazon

Features:

  • Makes old, worn concrete look like new
  • Highly flowable material for resurfacing large areas of concrete
  • Easy to apply with a lightweight squeegee
  • Polymer modified for superior bonding strength

Bluestar Concrete Resurfacer

2 – Bluestar Concrete Resurfacer

Check the price on Amazon

Buy on Amazon

Features:

  • REPAIR CHIPS & DIVOTS IN CONCRETE SURFACES
  • DIY - FAST & EASY - NO SPECIAL TOOLS REQUIRED
  • RESURFACE SMALL CONCRETE AREAS WITH PRECISION.
  • RESTORE CONCRETE SURFACES TO A SMOOTH FINISH
  • MADE IN THE U.S.A.

QuestMark 2105 Standard Epoxy Concrete Floor Patch and Resurfacer - 5 Gallon Unit, Light Gray - Three Component 100% Solids Mortar - Fill and Repair Cracks, Holes, Pits and Spalling

3 – QuestMark 2105 Standard Epoxy Concrete Floor Patch and Resurfacer - 5 Gallon Unit, Light Gray - Three Component 100% Solids Mortar - Fill and Repair Cracks, Holes, Pits and Spalling

Check the price on Amazon

Buy on Amazon

Features:

  • This epoxy mortar provides excellent flexural, tensile, and compressive strength when patching or resurfacing concrete floors (See Specification Sheet for details).
  • Most effective for floors that require patching and/or resurfacing, but do not require a lot of chemical and impact resistance.
  • At 70 degrees F Pot life of 20-30 minutes; May be recoated in 6-7 hours; Light foot traffic in 12-14 hours; Full cure (heavy traffic) in 2-7 days
  • Apply to a thickness of 1/8" to 1/4". At this thickness, our 5 Gallon unit covers approximately 19.15 sq ft.
  • This system consists of resin, hardener and aggregate components. It is proudly manufactured in the USA.

Concrete Patcher and Resurfacer 10 lb. Gray Patch and Resurfacer

4 – Concrete Patcher and Resurfacer 10 lb. Gray Patch and Resurfacer

Check the price on Amazon

Buy on Amazon

Features:

  • Container Type: Pack; Container Size: 10 lb.; Dry Time: 30 min.

QuestMark 2110 High Traffic Epoxy Concrete Floor Patch and Resurfacer - 2 Gallon Unit, Light Gray - Three Component 100% Solids Mortar with High Impact and Abrasion Resistance

5 – QuestMark 2110 High Traffic Epoxy Concrete Floor Patch and Resurfacer - 2 Gallon Unit, Light Gray - Three Component 100% Solids Mortar with High Impact and Abrasion Resistance

Check the price on Amazon

Buy on Amazon

Features:

  • This resin-rich formula epoxy mortar is highly impact and abrasion resistant, with the highest compression strength of our mortars (See Specification Sheet for details).
  • Ideal for loading docks, traffic aisles and machining areas, as it stands up to heavy traffic from steel wheels and forklifts.
  • At 70 degrees F Pot life of 30-40 minutes; May be recoated in 7-8 hours; Light foot traffic in 14-16 hours; Full cure (heavy traffic) in 2-7 days.
  • Apply to a thickness of of 1/8" to 1/4". At this thickness, our 5 Gallon unit covers approximately 21.54 sq ft.
  • This system consists of resin, hardener and aggregate components. It is proudly manufactured in the USA.

SAKRETE | Flo-Coat Concrete Resurfacer | 40 lb

6 – SAKRETE | Flo-Coat Concrete Resurfacer | 40 lb

Check the price on Amazon

Buy on Amazon

Features:

  • Use to make old or worn concrete surfaces look like new
  • 1/2” down to a featheredge
  • Excellent bond to old concrete - no primer needed
  • Open to light foot traffic in 4 hours
  • Interior or exterior applications

Patch and Resurfacer, 5 lb, Pack, Gray

7 – Patch and Resurfacer, 5 lb, Pack, Gray

Check the price on Amazon

Buy on Amazon

Features:

  • Adhesives & Sealants
  • Country of manufacture: United States
  • Manufacturer: Dap

Armor Renew Wood & Concrete RESURFACER 4 GAL Pail, Nantucket Gray

8 – Armor Renew Wood & Concrete RESURFACER 4 GAL Pail, Nantucket Gray

Check the price on Amazon

Buy on Amazon

Features:


Sakrete Flo-Coat Concrete Resurfacer (50 lb Pail)

9 – Sakrete Flo-Coat Concrete Resurfacer (50 lb Pail)

Check the price on Amazon

Buy on Amazon

Features:

  • Polymer-modified
  • Easy to apply with trowel or squeegee
  • Add water, mix, and use
  • For depths of ¼ in. down to ⅛ in.

Quikrete Re-Cap Concrete Resurfacer 40 lb.

10 – Quikrete Re-Cap Concrete Resurfacer 40 lb.

Check the price on Amazon

Buy on Amazon

Features:

  • Re-Cap Concrete Resurfacer
  • Assured for high quality and standardsSpecifications
  • Country of Origin: United States
  • Weight: 40 lbs
  • Produced with the highest grade materials

 

How to Choose the Right Concrete Resurfacer

Concrete Resurfacer is a popular flooring product that can be used to repair and restore concrete floors in both commercial and residential settings. However, with so many different concrete resurfacing products out there, it can be hard to determine which one is best for your concrete project. This article will dig down deep into the various types of concrete resurfacing systems to find the most important features of each one while also reviewing some of the top concrete resurfacer available on the market today. The goal of this article is to help buyers determine what type of Resurfacer they need for their projects, whether it be in the home or in the office.

A square foot of new concrete is going to cost more than two square feet of stamped concrete. This is because the square footage of the concrete is much larger than the amount of materials that make up a square foot. Most importantly, this is because stamped concrete has already been installed by a professional installer. As such, these resellers are able to buy their supplies at a much cheaper price than what it would cost to make these repairs on your own.

One of the most common options for a homeowners is a rapid set concrete resurface system. Rapid set resurfaces are premixed products that consist of two parts – the base coat, and the crack kit. The base coat is an oily compound that provides the resistance to cracking that the company is looking for. On the other hand, the crack kit consists of cement that has been highly-charged with tumbling water. After the cement dries, it will be ready for application on any type of surface.

Another important consideration in the selection of a concrete resurfacing system is the drying time. You want your driveway or patio to dry quickly so that you can get around it without delay. If you purchase a rapid set system, then you won’t have to worry about the drying time. A rapid set concrete resurfacer can usually produce the best results in just a few hours. So if you need your driveway or patio cured quickly, this is definitely the way to go.

When selecting a sealer for a concrete resurfacing job, there are many factors that you should take into account. You will want to consider how easy the sealer will be to clean up your driveway. If you have a high pressure washer that gets the job done quickly, then you don’t need a heavy-duty sealer. However, for most surfaces, a penetrating sealer like a polyurethane foam sealer is a good choice.

Another factor that should be taken into account is abrasion resistance. In fact, there is actually an industry standard for what is considered to be a good concrete resurfacer. This is referred to as Abrasion Resistance and is the amount of force that a particular concrete resurfacing system is able to withstand before cracking. Most companies will list their products with a specification for abrasion resistance. So make sure that you find out exactly what that rating is for your chosen concrete resurfacing system.

Some of the most popular products are available with different levels of depth of cut. For example, you might want to use a lower depth of cut on a light pole than you would on a larger walkway. It all depends upon the application needs of the project and what you hope to accomplish with your new Portland cement driveway. A concrete resurfacer with a good Abrasion Resistance rating of 5 is a good choice for most jobs.

You can choose from many different colors when purchasing a Portland cement driveway resurface. While color doesn’t matter too much, you may find that you need to choose one that matches your existing driveway. In this case, simply take a look at the paint on your current driveway. If it is a light or pastel color, that might be a good option. On the other hand, if your current driveway has a dark gray tinge to it, you may want to go with a darker shade of color to better match your new resurface.