Craft Heat Guns

of October 2021

*Disclaimer: BestAlternativesReview earns a commission from qualifying purchases.

SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122℉~1202℉(50℃- 650℃)with Overload Protection for Crafts, Shrinking PVC, Stripping Paint

1 – SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122℉~1202℉(50℃- 650℃)with Overload Protection for Crafts, Shrinking PVC, Stripping Paint

Check the price on Amazon

Buy on Amazon

Features:

  • ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
  • ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
  • ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
  • ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface. Blast Capacity:250-500L/min

6.56FT Long Heat Gun, Uptdae Version Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp

2 – 6.56FT Long Heat Gun, Uptdae Version Homidic Mini Handheld Hot Air Gun, Electric 300W Portable Heat Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp

Check the price on Amazon

Buy on Amazon

Features:

  • ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
  • ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
  • ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
  • ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
  • ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit with 752℉&1112℉ Dual-Temperature Settings and 4 Nozzles for Crafts, Shrinking PVC, Stripping Paint

3 – SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit with 752℉&1112℉ Dual-Temperature Settings and 4 Nozzles for Crafts, Shrinking PVC, Stripping Paint

Check the price on Amazon

Buy on Amazon

Features:

  • ►【Strong Power With 2 Modes】 SEEKONE heat gun provides strong power to quickly heat up in seconds.The 1800W motor generates enough hot air for almost any project, there are two modes: I: 400℃, 250L/min; II: 600℃, 500L/min.
  • ►【High and Low Temperature Settings】 You can switch the temperature between the low setting of 752℉(400℃)and high of 1112℉ (600℃) with a single push of a button to easily help complete household home improvement tasks. Dual temperature option to meet different needs in your project.
  • ▶ 【Scientific Ergonomic Design & Wide Applications】SEEKONE heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries.Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
  • ►【Four Nozzles Accessories】Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface. (Note: The heat blown out is highly concentrated,Don't use the nozzle for a long time.)
  • ▶【What You Get 】 1 x 1800W Heat Gun, 4 x Nozzles, 1 x User Manual, our worry-free and friendly customer service. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.

Leceha Mini Heat Gun for Epoxy Resin, 300W Portable Heat Gun for Crafts DIY Acrylic Resin Craft, Dryer Craft Heat Tool for Cup Turner, Shrink Wrapping, Crafts Embossing, Drying Paint

4 – Leceha Mini Heat Gun for Epoxy Resin, 300W Portable Heat Gun for Crafts DIY Acrylic Resin Craft, Dryer Craft Heat Tool for Cup Turner, Shrink Wrapping, Crafts Embossing, Drying Paint

Check the price on Amazon

Buy on Amazon

Features:

  • 💖HIGH QUALIITY MATERIAL: Mini Craft Heat Gun for Epoxy Resin adopts anti-scalding non-slip handles on the outside, independent switch buttons, and high-quality stainless steel air outlets and stainless steel brackets inside, making the use process safer.
  • 💖WIDE USAGE: The Hot air gun suitable for shrink wrapping, DIY craft embossing, drying paint, paper, DIY Cup Turner Spinner Cellphone etc.
  • 💖SIZE: This kit contains a Mini craft heat gun with 3 color brushes.The heat gun size is 8.86*1.8", the wire is 39.4 inches long. This size of the heat gun not only meets people's daily needs, but also is easy to carry and store.
  • 💖HOW TO USE: 300 Watts, nozzle temperature can quickly reach 200℃. The vent at the rear can reduce the internal high temperature and prolong the service life.
  • 💖WARM TIPSs: The working time of the epoxy resin heat gun should not exceed 10 minutes at a time.

Heat Gun Chandler Tool Dual Temp Hot Air Gun for Crafts, Epoxy Resin, Shrink Wrap, Vinyl, Embossing, Electronics, Phone Repair & DIY (Blue)

5 – Heat Gun Chandler Tool Dual Temp Hot Air Gun for Crafts, Epoxy Resin, Shrink Wrap, Vinyl, Embossing, Electronics, Phone Repair & DIY (Blue)

Check the price on Amazon

Buy on Amazon

Features:

  • ▶ Variable Speed / Heat Settings: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun and a full-size heavy-duty heat gun all in one!
  • ▶ Versatile: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
  • ▶ Insulated - Ergonomic - Light Weight - Quiet: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
  • ▶ UL-Certified - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are not manufactured to North American safety standards & are not safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
  • ▶ Proud Global Company - Launched in a small LA loft, we now have team members and factories spanning the globe. We believe our tools should serve a form and function. If for any reason you're dissatisfied, contact our customer care team; We'll happily make things right!

SEEKONE Heat Gun, 1800W Heavy Duty Hot Air Gun Kit with 572℉&1112℉ Dual-Temperature Settings and 4 Nozzles for Shrinking PVC,Stripping Paint, Crafts

6 – SEEKONE Heat Gun, 1800W Heavy Duty Hot Air Gun Kit with 572℉&1112℉ Dual-Temperature Settings and 4 Nozzles for Shrinking PVC,Stripping Paint, Crafts

Check the price on Amazon

Buy on Amazon

Features:

  • ★【Strong Power With 2 Modes】 SEEKONE heat gun provides strong power to quickly heat up in seconds. The 1800W motor generates enough hot air for almost any project, there are two air flow modes: I: 300℃, 250L/min; II: 600℃, 500L/min.
  • ★【High and Low Temperature Settings】 You can switch the temperature between the low setting of 572℉(300℃)and high of 1112℉ (600℃) with a single push of a button to easily help complete household home improvement tasks. Dual temperature option to meet different needs in your project.
  • ★【Scientific Ergonomic Design & Wide Applications】SEEKONE heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries.Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
  • ★【Four Nozzles Accessories】Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface.
  • ★【What You Get 】 1 x 1800W Blue Heat Gun, 4 x Nozzles, 1 x User Manual, our worry-free and friendly customer service. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.

Bubble Removing Tool for Epoxy Resin and Acrylic Art, DIY Glitter Tumblers, Specially-Designed Heat Gun for Making Acrylic Resin Travel Mugs Tumblers to Remove Air Bubbles (Pink)

7 – Bubble Removing Tool for Epoxy Resin and Acrylic Art, DIY Glitter Tumblers, Specially-Designed Heat Gun for Making Acrylic Resin Travel Mugs Tumblers to Remove Air Bubbles (Pink)

Check the price on Amazon

Buy on Amazon

Features:

  • DRIES 5X QUICKER THAN HAIRDRYER - Whether you need a heat gun for detail work or for quick work on big projects, this heat gun for crafts won't disappoint you. With technology that allows it to heat up in seconds, the heat gun can instantly reach up to 200°C/390°F in temperature.
  • WITH BUILT-IN STAINLESS-STEEL STAND - This heat gun for resin can make crafting even easier with its retractable stainless stand. Enjoy a hands-free operation for your epoxy resin glitter tumbler making.
  • SLEEK DESIGN AND QUALITY MATERIALS - Sleek and ergonomic, this epoxy resin heat gun is the ultimate handheld heat gun for crafters. At just 8.8 inches in length and 1.8 inches in width, you can easily operate this heat gun in one hand. The heat gun's textured ABS plastic body provides a better grip while its 38-inch wire and plug will allow wide coverage on canvases.
  • CAUTION: The working time for this heat gun for epoxy resin is less than 3 minutes. Beyond that, the heat gun's plastic parts may melt due to excessive heat. Also, always pay close attention when using the heat gun on flammable objects and objects made of low-melting-point plastics. As a safety precaution, do not use the heat gun too close to the surface of the object you are trying to heat or dry.
  • US-BASED CUSTOMER SERVICE - Unsatisfied with the product? Don't hesitate to contact our US-based customer service team.

Heat Gun resin bubble remover 6.6ft Cable Dual-Temperature 300W Hot Air Gun for Drying Paint, Clay, embossing heat gun

8 – Heat Gun resin bubble remover 6.6ft Cable Dual-Temperature 300W Hot Air Gun for Drying Paint, Clay, embossing heat gun

Check the price on Amazon

Buy on Amazon

Features:

  • Dual-Temperature HEAT GUN: Dual Temperature (0-200℃-300℃). 6.5ft Cable Hot Gun is We specialize in designing DIY hot air fan for American customers. Mini Heat Gun Electric110V 300W 200°C/300°C Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools
  • SAFETY HOT GUN: The temperature control device is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with abnormal heat, the temperature control cuts off the current itself, which protects the safe operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire. The body is made of ABS which has some functions such as heat resistance, low temperature resistance and so on; Outlet is made of stainless
  • 6.6FT CABLE AND METAL BRACKET: UL safety certified extra long cable, you can use it flexibly in the 6.6ft range. Stainless steel bracket can whirl about 100 degree and it can stand on the table safely; The left and right sides have a heat sink which can reduce th internal temperature and prolong the service life.
  • EASY TO USE: It is very easy to use it. Just keep about 3-5cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it; The temprature can not be adjusted, but it can reach at about 200°C/300°C in few seconds which heat up quickly and works like a charm.
  • WHAT YOU GET: 1pcs 300W Hot Air Gun, 12 month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.

DIY Heat Gun 6.6ft Cable 300W Dual-Temperature Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools

9 – DIY Heat Gun 6.6ft Cable 300W Dual-Temperature Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools

Check the price on Amazon

Buy on Amazon

Features:

  • 【Upgrade Dual-Temperature HEAT GUN】Dual Temperature (OFF-200℃-300℃). 6.5ft Cable Hot Gun is We specialize in designing DIY hot air fan for American customers. Mini Heat Gun Electric110V 300W 200°C / 300°C Portable Hot Air Gun for DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, Multi Function Hand-hold Heat Tools
  • 【SAFETY HOT GUN】The temperature control device is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with abnormal heat, the temperature control cuts off the current itself, which protects the safe operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire. The body is made of ABS which has some functions such as heat resistance, low temperature resistance and so on; Outlet is made of stainless
  • 【EAUTIFUL DESIGN】Stainless steel bracket can whirl about 100 degree and it can stand on the table safely; The left and right sides have a heat sink which can reduce th internal temperature and prolong the service life
  • 【EASY TO USE】 It is very easy to use it. Just keep about 3-5cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it; The temprature can not be adjusted, but it can reach at about 200°C / 300°C in few seconds which heat up quickly and works like a charm.
  • 【WHAT YOU GET】 1pcs 300W Hot Air Gun, 1pcs Detailed Instructions, 12 month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full product refund, no questions asked and no need to return the product.

SEEKONE Heat Gun 1500W Heavy Duty Hot Air Gun Kit with 800℉&1112℉ Dual-Temperature Settings, 4 Nozzles and Overload Protection for Crafts, Shrinking PVC, Stripping Paint

10 – SEEKONE Heat Gun 1500W Heavy Duty Hot Air Gun Kit with 800℉&1112℉ Dual-Temperature Settings, 4 Nozzles and Overload Protection for Crafts, Shrinking PVC, Stripping Paint

Check the price on Amazon

Buy on Amazon

Features:

  • ►【Dual Temperature Settings】 SEEKONE heat gun can switch the temperature between the low setting of 800℉(425℃)and high of 1112℉ (600℃) with a single push of a button to easily help you finish household home improvement tasks. Dual temperature option to meet different needs in your project.
  • ►【Strong Power With 2 Modes】 The hot air gun tool provides strong power to quickly heat up in seconds. The 1500W motor generates enough hot air for almost any project, there are two air flow speed control modes: I: 425℃, 300L/min; II: 600℃, 500L/min. 4.9ft ultra long cable helps you do crafting in large area more conveniently.
  • ►【Four Nozzles Accessories】Wide nozzle directs a long, narrow heat pattern to the work surface; 3-layer focusing nozzle direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface. The small round nozzle is great for welding plastics, soldering and shrink wrapping. (Note: The heat blown out is highly concentrated, don't use the nozzle for a long time.)
  • ►【Scientific Ergonomic Design & Wide Applications】This heat gun has a scientific ergonomic design and non-slip handle. The built-in stand is easy for the tool to cool down. Ideal use for shrinking tubes, pipes and wrap, heating PVC, repairing electronics and cell phones, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing work.
  • ►【What You Get】 1 x 1500W Heat Gun, 4 x Nozzles, 1 x User Manual, our worry-free and lifetime customer service. Anything happened about the product, please feel free to contact us at any time, we are always here for you.

 

How to Choose the Best Craft Heat Guns

Craft heaters are especially helpful to craft artists who need to finish projects which require, more than a thousand watts of directed heat to complete. Craft heaters are also used in applications where controlled heat is needed, such as melting metals and baking cookies. Craft heaters are sometimes referred to as “hot air” or “induction” heaters. They are very safe to use because their operation is almost entirely enclosed and completely self regulated.

There are advantages and disadvantages to using craft heat guns. Pros enjoy the flexibility and power of a single application unit which can heat up to a thousand degrees Fahrenheit. The cons of using a craft heater are that they can be expensive and they take up a lot of space. Craft heaters which use induction or fan-coil technology are more compact and less costly, but they can still be very powerful.

A Craft Heater gun should be well built and easy to operate. The heating element should provide a steady hot surface and the heating plate, or burner, should be smooth and sturdy. The burner can range from a single or two stages to more complex models capable of heating a full kilowatt of water. They should be well built and able to handle heavy duty operation as well as produce an accurate, 1000 f temperature reading.

There are some simple steps to selecting the best heat gun for crafting. The most important factor is the wattage, which refers to the amount of power required to raise the temperature of water to a given level. Other factors to consider are the size of the heating area and the type of materials being worked with. In addition to size and power, the availability of a Craftsman heat gun is critical in selecting the best choice.

Craftsmen heaters can range from small, portable units that can be moved from work site to work site, all the way up to large, stationary units that can regulate temperatures on a larger scale. Most of the available Craftsman guns offer one of three different configurations: an adjustable airflow system, a pre-heated interior surface and a variableheat fan. Each of these features has its advantages and disadvantages, and the ads will detail each of them. The advertisements will also detail what sort of warranties are offered on the products, as well as their installation instructions.

Before purchasing a Craftsman heater, it is important to first check the available options and find the best budget for the job. The best heat gun deals will be offered to those who are willing to do a little research on their own. Some of the best options to check price and wattage are found in on-line reviews of various models. Also, when making your purchase, it is a good idea to keep in mind the compatibility of the Craftsman’s heat source with the type of furnace or boiler that will be installed. Not only will this help you determine the best budget, but will also help you to better understand the dimensions and efficiency of the Craftsman heater that you choose.

Once you have determined how much you want to spend and checked price and wattage, it is time to start checking out the features. The two most important features to look at include the dual and the variable settings. A Craftsman dual is an example of a dual heater; dual heat controls the temperature of two rooms at the same time. The variable settings on a Craftsman dual are another important feature to check. A Craftsman variable heat gun allows you to control the heat setting of the heater to ensure that your rooms are at the perfect temperature for your particular use.

When it comes to choosing which particular Craftsman heater will be best suited to your needs and requirements, there are a few other essential add-ons that should be considered as well. Look for a gun that has a safety lock, which will prevent children or pets from accidentally setting the temperature of the tank too high. Also, if you live in an area where winter weather is prevalent, check to see if a blower or fan is a part of the package. Finally, it is always a good idea to consider installation costs and warranties when purchasing heaters, as these can sometimes be quite substantial.