Level 3 Ballistic Helmets

of October 2021

*Disclaimer: BestAlternativesReview earns a commission from qualifying purchases.

M88 Class II Bulletproof Steel Helmet, Outdoor Protective Helmet, Tactical Helmet Steel Helmet( 0988)

1 – M88 Class II Bulletproof Steel Helmet, Outdoor Protective Helmet, Tactical Helmet Steel Helmet( 0988)

Check the price on Amazon

Buy on Amazon

Features:

  • Anti-ballistic performance: Effectively prevent 54-type 7.62mm pistol and 51-type 7.62mm pistol bullets (lead core) within the specified range. The bulletproof level is two. The bulletproof helmet is tested at a distance of 5M. The helmet should be used when 5 shots are effectively hit. Block the warhead, the height of the bullet mark of the helmet shell is not more than 25MM, and no parts of the suspension buffer system fall off after the test.
  • Environmental adaptability in water (the maximum height of bullet damage on the back is 7.5MM), high temperature (the maximum height of bullet damage on the back is 7.5MM), and low temperature (the maximum height of bullet damage on the back is 6.5MM). After the test, the phenomenon of no cracks, blistering and delamination on the surface can be maintained. Class ballistic performance
  • Dimensions: Long axis L: 246mm * Short axis B: 225mm * Height H: 171mm Product structure: The helmet consists of a helmet shell, a chin strap, and a helmet top suspension system. Material quality: 2.0MM bulletproof steel plate Protected area: 0.13㎡ Helmet quality: "1.96kg
  • Chin strap device Hang a 45KG weight in the center of the chin strap. Within 3 minutes, the attachment did not break or slip off, and the emergency trip did not disengage or damage. Flame retardancy: The flame of the helmet shell will self-extinguish within 5s Shooting distance: 5 meters Shooting parts: front, back, left, right and top of the head Bullet speed: 421M/S-441M/S

Rothco OTG Ballistic Goggles, Black/Smoke

2 – Rothco OTG Ballistic Goggles, Black/Smoke

Check the price on Amazon

Buy on Amazon

Features:

  • Goggles Are Set to Military (MIL-DTL-43511D) And ANSI-Z87-1 Standards For Ballistic Eyewear Protection
  • The OTG Goggles Have Been Specifically Designed To Fit Over Your Prescription Glasses Or Sunglasses With A 7/8†Cut Out On Each Side For The Temples
  • 2mm Thick Polycarbonate Anti-Fog And Anti-Scratch Lenses and UV 400 Protection Treatment
  • Moveable Hinges And Adjustable Strap Allow Goggles to Stay In Place While Mobile. In Addition, 3/8" Foam Padding Around The Tactical Goggles And Top And Bottom Vents Provides Long Lasting Comfort And Breathability
  • Cleaning Cloth And Cover Included To Protect Goggles When Not In Use

EMERSONGEAR Tactical Adjustable Fast Helmet,MH Style Helmet with Side Rails and NVG Mount,Fast MICH Ballistic Helmet for Airsoft Paintball Hunting Shooting Outdoor Sports (FG)

3 – EMERSONGEAR Tactical Adjustable Fast Helmet,MH Style Helmet with Side Rails and NVG Mount,Fast MICH Ballistic Helmet for Airsoft Paintball Hunting Shooting Outdoor Sports (FG)

Check the price on Amazon

Buy on Amazon

Features:

  • ABS material. Lightweight, Durable,Hard Shell Design.
  • Simple installation and easy removal ,adjustable internal padding, replacement internal pad and headband set available.Adjustment Rear Dial Knob for Head Size adjustment.
  • Velcro Panels on right, left, and backside of helmet for Morale Patches, Nameplates and IR / Reflective Tabs.
  • Side Rails fit a variety of accessories, Integrated NVG mount compatible with most GoPro NVG style mounts (NVG mount not included).
  • Great for training, search and rescue, climbing,tactical,hunting,shooting,cycling,and other outdoor sports etc.

S.W.A.T. Team Costume Helmet with Folding Face Mask. Black, One Size

4 – S.W.A.T. Team Costume Helmet with Folding Face Mask. Black, One Size

Check the price on Amazon

Buy on Amazon

Features:

  • Made of firm materials. Each helmet has a full foam pad for a more comfortable feel.
  • 100% Polypropylene Black Color. Durable plastic made for novelty use only. Not a safety device.
  • S.W.A.T. police costume accessory. Great for Halloween, Cosplay, Theater and more Police Helmet Costume For Adults, Police Helmet Costume For Men, Adult Police Helmet, Mens Police Helmet, Police Helmet for Costume Reenactment,
  • Replica Police Helmet Costume Accessory SWAT Helmet for Adults or With Adjustable chin strap and folding face shield visor
  • One Size fits 62 cm or approximately 24 inches, Adult Small fits 56 cm or 22 inches Select your size from the drop down menu

H World Shopping Adjustable Maritime 10 Level of Kevlar Fibre Protective Helmet Tan DE L/XL

5 – H World Shopping Adjustable Maritime 10 Level of Kevlar Fibre Protective Helmet Tan DE L/XL

Check the price on Amazon

Buy on Amazon

Features:

  • 100% Brand New. // Shipping: For Amazon Prime Order, Shipping by Amazon, only takes 3 ~ 7 days.
  • Size: L/XL, Size adjustable (57-62cm)
  • Color: DE,Weight: 1400g
  • Material: Made by 10 levels of High Quality Kevlar
  • Please note it does not has ballistic function and no testing report.

Level 3 Helmets for PLAYERUNKNOWN'S BATTLEGROUNDS ABS Helmet Game Perimeter Cosplay Products

6 – Level 3 Helmets for PLAYERUNKNOWN'S BATTLEGROUNDS ABS Helmet Game Perimeter Cosplay Products

Check the price on Amazon

Buy on Amazon

Features:

  • Material: this is the key point, with high density ABS material, strong and not easy to be damaged, also won't feel very heavy.
  • Real helmet making, built-in pu leather and seat belt, can be used as a real cycling helmet, just a bit more eye-catching.
  • Fits for head circumference about 22-25 inch. Can adjust the size of this helmet.
  • Restore all aspects of the details.
  • Cosplay Helmet.

Level 3 Milly Razor - Fast and East to Assemble - Excellent Grip and Control - Straight Razor Holder- Level Three Razor Holder

7 – Level 3 Milly Razor - Fast and East to Assemble - Excellent Grip and Control - Straight Razor Holder- Level Three Razor Holder

Check the price on Amazon

Buy on Amazon

Features:

  • FAST AND EASY - We designed our straight razor holder with fast and easy razor blade changing with excellent grip and control.
  • EASY ASSEMBLE - The straight blade holder is easy to assemble and disassemble for cleaning.
  • EASY VISIBILITY - Our barber razor holder is quipped with a partially exposed blade for easy visibility.
  • HIGH QUALITY - Our barber straight razors holder are made with high quality resin and a rounded shape tip for customer comfort.
  • DURABLE - The shaving blade holder is designed with a thick solid stainless steel body making it very durable.

WarTechGears Discreet Vest MED-2XL 10'X12' Fully Adjustable Law Enforcement (Black)

8 – WarTechGears Discreet Vest MED-2XL 10"X12" Fully Adjustable Law Enforcement (Black)

Check the price on Amazon

Buy on Amazon

Features:

  • Adjustable hook and loop fastener shoulder straps, Perfect for Airsoft game, Paintball game and other outdoor activities.
  • Loop fasteners sewn to the front and rear of the vest for name, unit, or patches, We offer SWAT patches free of charge
  • Wrap-around hook and loop fastener cummerbund and adjustable shoulder straps
  • Compact and lightweight design, 8mm EVA foam 10"x12"inch, which is made from Non-toxic EVA, Can be used with confidence.
  • Black color; Adult Size Medium to 2X-Large.Total weight only 2 pounds.

Hygenix 3ply Disposable Face Masks PFE 99% Filter Quality Tested in a US lab (Pack of 50 Pcs)

9 – Hygenix 3ply Disposable Face Masks PFE 99% Filter Quality Tested in a US lab (Pack of 50 Pcs)

Check the price on Amazon

Buy on Amazon

Features:

  • 50 Pcs Latex Free Disposable Premium Quality tested face masks
  • Protects nose and mouth against fluids, Fluid-Resistant at a pressure of 160 mmHg Tested by Nelson Labs in the USA. Full reports available upon request!
  • These masks are manufactured in a class 100,000 cleanroom to uphold the maximum quality standards.
  • These masks should be disposed of after each use. Shelf live 2 years. Test reports available in the images, Need full reports? contact us and we will provide you these! (Tested by Nelson Labs in the USA and made in China by a Dutch owned brand and manufacturing facility).

Defender Safety- ASTM Level 3, 4 Layer, 99% PFE, Medical Grade, Procedure Face Mask (50 Pack)

10 – Defender Safety- ASTM Level 3, 4 Layer, 99% PFE, Medical Grade, Procedure Face Mask (50 Pack)

Check the price on Amazon

Buy on Amazon

Features:

  • Defender Safety- ASTM Level 3, 99% PFE, Medical Grade, Procedure Face Mask (50 Pack)
  • Defender Safety's quality is trusted by millions of professionals across the US .. 510(k) Cleared: K210705
  • The PM03 goes beyond the standard design, our Non-Woven's have been chosen with user comfort and performance in mind. When designing, and developing our facial protection we made sure to get feedback from professionals, patients and consumers who are going to be wearing these masks day in and out. Ear loop design, pleated, Blue, 4 ply (4 layer design), not made from natural rubber latex
  • Tested to ASTM F2100-17 Level 3 Standards by an ISO 17025 accredited testing lab facility
  • Performance: BFE> 98%, PFE> 98%, Liquid Barrier: 160 mmHg

 

Level 3 Ballistic Helmets

Level 3 Ballistic Helmets were introduced in 2021. These state of the art helmets contain cutting edge features such as front & rear armor covers, fully adjustable straps, side impact protection, face shield options, and also the ability to be sprayed with a camouflage paint. In addition, each Level 3 helmet is designed to meet or exceed the Department of Defense (DOD) and Federal Motor Safety Standards for crash protection. Please contact us if you have any questions about our products.

One of the most popular features on all Level 3 Ballistic Helmets are the front & rear armor covers. These front & rear armor covers provide up to an optional 15 month or lifetime warranty. These front & rear armor covers work to extend the life of your helmet by preventing corrosion from occurring and allowing airflow through the helmet. Each cover features a snap-on installation with a fully welded snap down design. This allows the cover to move with your head in order to provide the most comfort. Please contact us if you would like to know more about these armor covers.

Another feature that makes Level 3 Ballistic Helmets stand out from competitors is our interchangeable snap on face shield option. With the snap on face shield you can easily change over to a new style, by removing the headgear completely! Please contact us if you would like to know more about this interchangeable face shield option. Although not very comfortable, this option does allow a level of mobility for the wearer. If possible, please enable in your browser for the best possible experience.

Level 3 Ballistic Helmets are made with today’s strongest and toughest fiberglass yet are lightweight enough for the wearer. The outer fibers are woven tightly together which creates a more durable outer shell. This makes it stronger than other helmets on the market today. If you are interested in using this type of helmet please enable in your browser for the best possible experience.

One of the many popular features of Level 3 Ballistic Helmets is the adjustable chin strap. This is an important factor when selecting a helmet that will protect your head during a shooting. When we were testing the Team Wendy Exfil Helmet we were impressed with the fit and adjustability of the chin strap. The material used in the construction of the chin strap is lightweight and adds no weight at all to the wearer. If you are interested in purchasing one of these helmets we are happy and willing to assist you with any questions you may have.

One of the additional features that Level 3 Ballistic Helmets offer is our Universal Rear Pouch. This revolutionary, retractable foam padding is located in the back of the helmet and is removable and washable. We found that the material provides excellent fit and is very comfortable to wear. Many other companies leave the Universal Rear Pouch inside the helmet but our tests showed that it adds an element of comfort to the design. When you are able to remove the padding you are left with a very comfortable beanie hat with ventilation openings in the sides.

Many of the other features offered are designed to assist the operator in completing their assigned tasks. For example, you may want to disable the automatic clearing of the vents on the helmet. Please enable the ” Disable automatic ventilation” checkbox on the equipment panel. There is also the option to adjust the ventilation as needed. For those that like to stay dry there is the mesh helmet cover available. The mesh helmet cover will prevent any sweating and will keep your head from getting too hot in the summer or too cold in the winter.

It is very easy and fast to add items to your tactical gear online. First you select your equipment then go to the “gear” drop down menu and then click on the “add to cart”. If you have any questions about your order please contact customer service. Happy shopping! Thanks to Wendy Exfil ballistic mesh helmet cover for our review! You can also follow the link below to find other items that were not reviewed such as gloves, sunglasses, and other clothing items.