Router Lift

of October 2021

*Disclaimer: BestAlternativesReview earns a commission from qualifying purchases.

KREG PRS5000 Precision Router Lift

1 – KREG PRS5000 Precision Router Lift

Check the price on Amazon

Buy on Amazon

Features:

  • Allows precise above-the-table setup changes for table-mounted routers
  • Above-table collet access allows fast, easy, above-table bit changes
  • 3⁄8" x 9 1⁄4" x 11 3⁄4" (9.5 mm x 235mm x 298mm) Hard-anodized aluminum plate won’t Sag, resists scratches
  • Fits all Kreg Router tables and many competitive brands
  • Bearing-guided carriage provides smooth operation

JessEm 02120 Mast-R-Lift II Router Lift + 02030 10-Piece Insert Ring Kit with Caddy Bundle

2 – JessEm 02120 Mast-R-Lift II Router Lift + 02030 10-Piece Insert Ring Kit with Caddy Bundle

Check the price on Amazon

Buy on Amazon

Features:

  • BUNDLE INCLUDES: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems
  • BUILT-IN LOCKING MECHANISM: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations
  • COMPATIBILITY: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system
  • STURDY CONSTRUCTION: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off
  • LIFT SHAFTS: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations

JessEm 02310 Rout-R-Lift II Router Lift with Microjig Grr-Ripper 3D Pushblock Bundle (2 Items)

3 – JessEm 02310 Rout-R-Lift II Router Lift with Microjig Grr-Ripper 3D Pushblock Bundle (2 Items)

Check the price on Amazon

Buy on Amazon

Features:

  • BUNDLE INCLUDES: JessEm Rout-R-Lift II Router Lift with Microjig GRR-Ripper 3D Pushblock
  • COMPATIBILITY: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors
  • DOUBLE-SEALED BALL BEARING: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease
  • LIFT SHAFTS: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations
  • STURDY CONSTRUCTION: All the machined components on the Rout-R-Lift II are CNC machined for durability

SawStop RT-LFT Four-Post Router Lift with Lock

4 – SawStop RT-LFT Four-Post Router Lift with Lock

Check the price on Amazon

Buy on Amazon

Features:

  • Maximum Router diameter: 4 1/4"
  • Minimum Router diameter: 3 1/4"
  • Phenolic insert ring diameter: 3 3/4"
  • Router reducer collars (included): 3 1/4" & 3 1/2"

JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch

5 – JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch

Check the price on Amazon

Buy on Amazon

Features:

  • Exclusive Cam Locking System
  • Double sealed bearing construction
  • Bit Changes above the table for all routers
  • Machined from 3/8-Inch solid aluminum and Hard Anodized for durability
  • Fits most fixed base routers on the market today

INCRA Mast-R-Lift-II Router Lift

6 – INCRA Mast-R-Lift-II Router Lift

Check the price on Amazon

Buy on Amazon

Features:

  • Exclusive INCRA MagnaLOCK reducing ring system (3/8-Inch, 1-Inch, 1-5/8-Inch, 2-5/8-Inch, 3-5/8-Inch) for instant ring changes and perfect ring fit
  • Change router bits from the top of the table. Quickly make super precise, 0. 001-Inch height adjustments from above
  • 9-1/4-Inch x 11-3/4-Inch x 3/8-Inch plate size is compatible with all INCRA Router Tables and fits some other brands
  • Exclusive ball bearing mechanism for super smooth action and low friction
  • Patented thread tensioning system eliminates vertical lash in the lift mechanism. Ultra-responsive, direct drive 16TPI lift screw mechanism

Rockler Pro Lift Router Lift, 9-1/4'' x 11-3/4'' Plate

7 – Rockler Pro Lift Router Lift, 9-1/4'' x 11-3/4'' Plate

Check the price on Amazon

Buy on Amazon

Features:

  • 2018 Wood Magazine Innov8 Award winner
  • Make height adjustments 4 times faster with the Quick-Gear 4-to-1 gear box ratio—dramatically speeds up your bit changes
  • Use the precision gear to make adjustments to within 0.001''—one hex wrench for both gears
  • Push the button to release the insert ring for fast bit changes—no tools to search for; no screws to lose
  • Two expansion bars beneath the plate are adjustable for a perfect friction fit with the table

Rockler Pro Lift Router Lift (8-1/4'' x 11-3/4'' plate)

8 – Rockler Pro Lift Router Lift (8-1/4'' x 11-3/4'' plate)

Check the price on Amazon

Buy on Amazon

Features:

  • 2018 Wood Magazine Innov8 Award winner
  • Indexed marks on the fine adjustment screw let you raise the bit by a specific increment with the naked eye
  • Includes one insert ring with a 1-1/2'' opening; additional inserts and zero clearance insert assembly sold separately
  • 3/8'' thick machined aluminum plate and heavy-duty steel constructed guide posts with bronze bushings—designed for demanding daily use
  • Push the button to release the insert ring for fast bit changes—no tools to search for; no screws to lose

Woodpeckers Phenolic Router Table Top, 24 x 32 Inch, Solid Phenolic Tabletop 3/4 Inch Thick, Premium Precision Woodworking Tools, Black

9 – Woodpeckers Phenolic Router Table Top, 24 x 32 Inch, Solid Phenolic Tabletop 3/4 Inch Thick, Premium Precision Woodworking Tools, Black

Check the price on Amazon

Buy on Amazon

Features:

  • VERSATILE - A combination miter channel and T-track as well as two rotor table fence mounting tracks are embedded into the table top. Each table is pre-drilled with threaded holes for attaching to our steel router table stands
  • COMPATIBILITY - The router plate opening is 9¼" x 11¾" by just over 3/8" deep with ¾" radius corners making it compatible with most standard router mounting plates and lifts
  • QUALITY - This 24" x 32" phenolic wood router tool table top is made from a low friction, high hardness mineral top that is stronger and longer-lasting than PVC used by competing Router lifts. Not affected by humidity, heat or even water
  • PRECISION - To ensure consistently tight tolerances, we machine each one on our own state-of-the-art CNC equipment using high quality cutting tools for the best fit and finish
  • MADE IN USA - This premium, precision woodworking tool is built in the USA. (Router Table Stand #RTS2027 fits the #RT2432-PH router table and the #RTS2037 fits the #RT2743-PH router table)

Incra Mast-R-Lift-II-R Designed for Rockler Tables

10 – Incra Mast-R-Lift-II-R Designed for Rockler Tables

Check the price on Amazon

Buy on Amazon

Features:

  • Adjust the height of your router bit without having to reach below the table, or remove the router plate. Just slip in the lift crank and wind it up or down!
  • Exclusive INCRA MagnaLOCK reducing ring system for instant ring changes and perfect ring fit
  • Quickly make super precise, 0.001" height adjustments from above
  • Exclusive ball bearing mechanism for super smooth action and low friction
  • Ultra-responsive, direct drive 16TPI lift screw mechanism

 

Router Lift

A router lift helps eliminate much of the guesswork associated with table saw routering. The equipment is designed to securely and accurately raise a table saw up to 3 feet or more for complex angled cuts. This equipment comes in several different types and styles, each varying in how it holds the table saw. A good router lift allows you to do a wide variety of tasks, including cuts which would otherwise be impossible or difficult to make manually. In this article, we’ve listed some of the common uses for these lifting devices, as well as some great resources to find quality units.

Raising the height of a table saw can be as simple or as complicated as you need it to be. If you want to make minor adjustments while making a long cut, there are a few options, including tilting and locking the machine to level the work. In most cases, a router lift is simply a fixed rack and pinion assembly that extends out from the machine, holding the vertical spindle vertically. One benefit of this kind of system is that multiple adjustments can be made at the top of the unit, enabling a user to simply move the spindle off to the right, or to the left without having to get down on the table. Lifts may also allow for angle adjustments as well, so you can make sure the cut is as straight as possible.

If you’re looking to purchase a router lift and have no experience with this type of product, there are several ways to reduce your costs and get a quality machine at a reasonable price point. For one, consider where you plan to use the machine. If you’re planning on transporting the unit to different projects, consider whether you’ll be doing so on a flat bed truck, on a box truck, on a pallet truck, etc. The price point for these types of moves will vary, depending on the logistics surrounding them. If you aren’t going to be transporting the unit on a truck, for example, a simple ball bearing roller or pulley system will be more than sufficient to provide the level of accuracy that you require.

The next factor in determining the best router lift for your needs involves the design of the device itself. There are basically two different types of adjustment mechanisms: hydraulic and ball bearing. A hydraulic mechanism makes use of a piston and counterweight to raise and lower the height of the blade. A roller or counterweight will provide similar results, but the former requires a stationary platform, whereas the latter uses a pendulum. As you can see, both of these mechanisms work very well, but one has a definite advantage in price: the hydraulic system is much cheaper to run, so this may be your best bet if you don’t plan on moving the device on a regular basis. However, a hydraulic system may not be as precise as the other option, and it also comes with the drawback of having a limited warranty.

The final factor to consider when choosing a router lift is what type of motorizes it. In order to make precise cuts, you need a powerful motor that can handle the constant motor pressure required by a router lift. Cam Lock and Adjustable Motors (CAM) are two popular options that provide this power. If your project needs to move in any way that requires high accuracy, then this option is the best one to go with. With a cam lock router lift motor, you can even program the height adjustments at any time, which is extremely helpful.

The final factor to take into consideration is how customizable your router lift device is. The truth is that there is not a single product out there that will please everyone, so it’s important that you do some research before you purchase one. Luckily, it is pretty easy to find packages that are customized according to your specifications. For example, there are packages that are built to be compatible with any router, regardless of its size or function. Additionally, there are also packages that allow you to build a deck from scratch, so that you can add in anything that you want. This makes it extremely easy to create exactly what you need, so that you can make that little bit more precise cut every time.

The final aspect to take a look at is exactly what the product includes. In short, most products include a router lift, jessem rout-r-lift 2, guide rails, and various screws. While you won’t have to worry about many complicated instructions, you will need to know exactly how much material is on hand as well as how many rails and guides are required to hold everything in place. If you don’t know how much material and what kind of hardware is required, then it may be worth considering going out and purchasing pre-made kits instead. This way, you can get exactly what you need, which will ensure that you don’t end up wasting any time or money getting it all together.

The last major point to take a look at is how adjustable the router lift is. There are a number of different designs in this category, ranging from those that allow for very narrow cutting angles to those that are able to handle extremely high cutting heights. As such, it is really up to you to decide how much you are able to handle. The bottom line is, though, is that if you are simply in the process of building one or two smaller tables then you probably won’t be too bothered by the ability to change the height to that which you need. On the other hand, if you are looking to replace or build a larger selection of tables, then it is the best way to go.