Way to Cut Metal Roofing

of January 2022

*Disclaimer: BestAlternativesReview earns a commission from qualifying purchases.

MIDWEST Aviation Snip Set - Left and Right Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6510C

1 – MIDWEST Aviation Snip Set - Left and Right Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6510C

Check the price on Amazon

Buy on Amazon

Features:

  • 2 PIECE OFFSET SET - This set includes both left and right cut offset models for optimal cutting ability
  • LONGEST LASTING CUTTING EDGE - These blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability
  • STRONGEST HANDLES - High Tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power
  • COMFORTABLE GRIPS - Kush'N-Power grips conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage
  • EASY CUTTING - Compound leverage multiplies handle force to cutting blades by 8: 1 for significantly less fatigue. MADE IN USA

Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips - Straight, Left and Right Cut - M3R

2 – Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips - Straight, Left and Right Cut - M3R

Check the price on Amazon

Buy on Amazon

Features:

  • Cuts straight and slight curves with yellow handles for quick identification
  • Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel
  • Blade serrations spread cutting force across jaws improving cut quality and tool life
  • Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
  • Ergonomic, single handed latch operation for left or right handed use

Bates- Nail Puller, Pliers, Nail Remover Tool, Cutting Pliers, Carpenter Tools, Staple Puller, Nail Puller Tool, End Cutting Pliers, Nail Remover, Nail Pliers Cats Paw Nail Puller, Nail Pulling

3 – Bates- Nail Puller, Pliers, Nail Remover Tool, Cutting Pliers, Carpenter Tools, Staple Puller, Nail Puller Tool, End Cutting Pliers, Nail Remover, Nail Pliers Cats Paw Nail Puller, Nail Pulling

Check the price on Amazon

Buy on Amazon

Features:

  • 7” End Cutting Plier, Nail Puller
  • Made From High Carbon Steel For Long Lasting Performance And Preventing Rust
  • Soft Plastic Coated Grip
  • Dual Use End Nipper Pliers To Cut Wires Or Nails Or Simply Pull Them Out
  • Perfect For Carpenters, Construction, Handymen, Installing New Floor, Etc.

CRAFTSMAN Aviation Snips, Straight Cut (CMHT73756)

4 – CRAFTSMAN Aviation Snips, Straight Cut (CMHT73756)

Check the price on Amazon

Buy on Amazon

Features:

  • CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel.
  • EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation
  • DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws).
  • 1/4-inch blade markings for quick precise cuts

Hurricane 10 Inch Aviation Tin Snips, Straight Cut, Heavy Duty Metal Cutter for Cutting Sheet Metal, Chrome Vanadium Steel

5 – Hurricane 10 Inch Aviation Tin Snips, Straight Cut, Heavy Duty Metal Cutter for Cutting Sheet Metal, Chrome Vanadium Steel

Check the price on Amazon

Buy on Amazon

Features:

  • 【Straight Regular Cut】Hurricane 10 Inch Aviation Tin Snips, Cuts straight and wide curves to the left and right, ensure a secure hold and precise cuts.
  • 【Longest Lasting Edge】Chrome Vanadium Steel, Serrated edge blades with sanding finish for maximum strength, durability, and long lifetime.
  • 【Cut Capacity of Tin Snip】Cuts up to 1/16"(1.8mm) cold-rolled steel sheet.
  • 【Comfortable Grips】Ergonomical Tyregrip Handle with rubberized grip for comfort and control.
  • 【Safety and High Efficiency】Locking latch prevents damage to cutting edge when stored. Spring-assisted latch on metal snips for fast one-handed operation.

Finder 12' Aviation Snips, Long Straight Cut Tin Snips Cutting Shears Power Cutter with CR-V Blade & Comfortable Grip, 300mm Scissors for Cutting Metal Sheet, Hard Material, Industrial Quality

6 – Finder 12" Aviation Snips, Long Straight Cut Tin Snips Cutting Shears Power Cutter with CR-V Blade & Comfortable Grip, 300mm Scissors for Cutting Metal Sheet, Hard Material, Industrial Quality

Check the price on Amazon

Buy on Amazon

Features:

  • STRAIGHT REGULAR CUT: The extra long straight-cut aviation snip is used to cut straight and wide curves to the left and right, and can be used in either hand. The straight blades that allow the hand to be kept safe above the cutting work below.
  • LONGEST LASTING CUTTING EDGE: The blades are hot drop-forged of premium CRV steel and austemper heat-treated for maximum strength and durability. The aviavtion tin snips adopt vibration grinding head covering anti-rust oil, which is rustproof and more endurable.
  • ERGONOMIC DESIGN: The ergonomic designed TPR handle with comfortable soft grip, which conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage. The tail of aviation shear is with suspension hole design, which is easy to carry and store.
  • SAFE & HIGH EFFICIENCY: The metal safety lock is between the strong handles. It' s easy to open and close for convenient security system. High tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power. Serrated cutting edges prevent materials from slipping during use. It' s safe and easy to do metal working!
  • WIDE APPLICATION: Finder aviation snips are ideal for use on sheet materials, beading, cans, tins and fixings, and specially designed to cut hard materials, aluminium, sheet metal, plastic plates, vinyl siding, cardboard, wire mesh, copper, leather, tiles, rubber and shingles.

mobarel - Aviation Tin Snips - Left Cut - Forged Cr-Mo

7 – mobarel - Aviation Tin Snips - Left Cut - Forged Cr-Mo

Check the price on Amazon

Buy on Amazon

Features:

  • Meets ANSI and DIN standard
  • Cutting Capacity - please refer to Specification Chart
  • Rust Protection - Hard Chrome plated blades increases tool life
  • extra linkage that increases mechanical leverage
  • One Handed Locking - Ease of use/Quick open

RadioShack HT-204 Nibbling Tool | nibbler metal cutter material | sheet metal shear | resistant to rust

8 – RadioShack HT-204 Nibbling Tool | nibbler metal cutter material | sheet metal shear | resistant to rust

Check the price on Amazon

Buy on Amazon

Features:

  • Can cut up to 18 gauge nonhardened metals and up to 1/16" plastics
  • Cuts, trims, and notches precision designs of all shapes and sizes
  • works well for creating holes for fuse holders, indicator lamps, switches, etc

INGCO 3 Pack Aviation Tin Snips Set Left Right Straight Offset Tin Cutting Shears 10 Inch Metal Cutter Pliers Nippers Snip for Sheet Metal with Comfortable Grips HTSNK0110

9 – INGCO 3 Pack Aviation Tin Snips Set Left Right Straight Offset Tin Cutting Shears 10 Inch Metal Cutter Pliers Nippers Snip for Sheet Metal with Comfortable Grips HTSNK0110

Check the price on Amazon

Buy on Amazon

Features:

  • 【High Quality】Made from high-quality CR-V steel, with overall heat treatment, higher hardness and long lifetime. Compound action snip set have durable structure, sharp tooth tip and easy cutting.
  • 【Safety Guarantee】The safety lock ensure that the jaw is closed firmly and the self-locking nut is connected firmly to prevent falling off and accidental injury.
  • 【Labor-saving Design】Each aviation snip has two leverage pivots for energy-saving operation and easy cutting; High-leverage design with serrated cutting edge prevent materials from slipping for efficient cutting.
  • 【Comfortable Handle】TPR handle, non-slip and wear-resistant. The widened handle design makes the grip more comfortable. The tail hanging hook is convenient for hanging and can prevent falling when working at height.
  • 【Wide Application】 With a cutting thickness range up to 1.2mm carbon steel and 0.7mm stainless steel, you can use these snips to cut steel.

Crescent Wiss 2 Pc. 9-3/4' MetalMaster Compound Action Snip Set M1R & M3R – M13RS

10 – Crescent Wiss 2 Pc. 9-3/4" MetalMaster Compound Action Snip Set M1R & M3R – M13RS

Check the price on Amazon

Buy on Amazon

Features:

  • The M1R cuts left from tight curves to straight with red handles for quick identification
  • The M3R cuts straight and slight left and right curves with yellow handles for quick identification
  • Blade serrations hold material firmly and spread cutting force uniformly across blade edge, improving cut quality and tool life
  • Superior design prevents tears at end of cuts by controlling blade bypass; minimizes folding and burrs
  • Cuts up to 18-gauge low carbon, rolled steel

 

A DIY Guide to Cutting Metal Roofing

 
This how to guide will help you cut metal roofing with ease. The first thing you want to do is get some good tools for cutting metal. Some of the best choices include: electric shears, a band saw, and diamond blades. When choosing which tool to use, think about the size of the panel that needs to be cut. Also consider the length of time you will have to keep the tools in good working order.
 
Step Two: To make sure your work is safe, make sure your work area has been cleared. Before you begin cutting, look over the area to make sure there won’t be any stray metal anywhere. Also make sure that the ground has been cleared of anything that will be distracting or potential obstacles during your project. Next, if you are using electric shears, make sure the cord hasn’t got pulled. Otherwise, the metal roof panels could easily be damaged by flying metal.
 
Step Three: The type of metal roofing to be used and its grade, is important. The best way to cut metal roof panels is to get one that is pre-drilled for bolt tightening. Pre-drilled holes allow the screws to be inserted tightly. If the panel is to be drilled later, it will be easier because there won’t be any loose bits sticking out.
 
Step Four: Choose the cutting tools. There are several different types of cutting equipment, including diamond blades, long-handled shears, and claw hammers. Be sure to choose one that will cut easily. Also consider the environment to determine what metal material is most appropriate for your area. For example, stainless steel may not be as rust-resistant as aluminum or galvanized steel.
 
Step Five: The actual cutting process starts with preparing the work area. This involves removing all loose debris, such as nails and screws, making sure it all falls inside the hole in the metal roofing. Make sure your bench is level and clean. Now it’s time to start using your cutting tool, making sure to pay close attention to the following safety precautions: Don’t let the cutting tools fall to the ground, don’t hold the tool in your hand, keep both hands on the tool at the same time, protect your eyes and ears from bits and pieces of flying metal, and read the manufacturer’s instructions carefully.
 
Step Six: Once you’ve made sure your height is correct (you’ll need a screwdriver between twelve and fifteen inches), dig your hole and line it up with the corners. It’s also helpful to have a friend help you hold the metal roofs so that you can accurately measure your areas. Start cutting, but be sure you wear ear protection and use a guide as you work. When you’ve got a good straight line between the corners, start scraping away at your way to make sure you’re cutting the metal roofs in the right direction.
 
Step Seven: You’ll use tin snips to cut your way through the metal roof, but it will take some practice and careful attention to detail. Use the tin snips to cut the individual sections and the tin snips to fill up the spaces left by cuts. If you’ve got a lot of open spaces between roof sections, be sure to overlap the cuts to create more even cuts.
 
Step Eight: You’ve got another problem. While you’re working with your circular saw blade and your tin snips, if you come into contact with any of the metal shavings that are left behind, you’ll be done for. This is why it’s important to always have a protective covering over your face when cutting metal roofing. The blade and any shavings left behind will catch all kinds of nicks and cuts, and that means you’ll have to start over again.